Results 21 - 20 of 44 for 'implants'

• 

  BUFFER-AREA PRESERVATION DIGITAL METHOD..

    High aesthetic demands were placed on the forthcoming treatment as well as maximal sustainable result was expected by the patient. The following was decided: 1.Removal of teeth 1.1, 2.1 2.One-time dental implantation in the position of the removed teeth with AnyRidge implants using navigation guide R2GATE; 3.One-time installation of permanent zirconium abutments on the dental implants; 4.Provision of conditions for creating a buffer area in the coronal direction with the help of soft tissue plastic surgery by free connective-tissue auto transplants in the area of installed zirconium abutments; 5.Installation of temporary crowns on the fixed individual abutments.

  Presented By : Aleksandr Lysov

  Hit : 1021

• 

  APPLYING SURGICAL GUIDE R2GATE for ONE-T..

  High aesthetic demands were placed on the forthcoming treatment as well as maximal sustainable result was expected by the patient. The following was decided: 1.Removal of teeth 1.1, 2.1 2.One-time dental implantation in the position of the removed teeth with AnyRidge implants using navigation guide R2GATE; 3.One-time installation of permanent zirconium abutments on the dental implants; 4.Provision of conditions for creating a buffer area in the coronal direction with the help of soft tissue plastic surgery by free connective-tissue auto transplants in the area of installed zirconium abutments; 5.Installation of temporary crowns on the fixed individual abutments.

  Presented By : Aleksandr Lysov

  Hit : 1414

• 

  Narrow ridge use i-Gen and AnyRidge are ..

  A 48 years old female patient was treated with two implants in the position of #45 #46.P't had narrow ridge at #45=4.75 mm #46= 5.19 mm Treatment plan  #45 AnyRidge 4.0*10  + i-Gen Type B1 +Bone Expander Kit +CGF +BioOSS +FDBA +Mega ISQ #46 AnyRidge 4.0*11.5 +i-Gen Type A1 +Bone Expander Kit +CGF +BioOSS +FDBA +Mega ISQ Follow 2 years 6 months , AnyRidge are stable  and good #45 ridge 4.75 mm -> 7.91 mm (ITV=70nt)(ISQ B=78 M=80)#46 ridge 5.19 mm -> 7.62 mm (ITV=60nt)(ISQ B=80 M=80)Narrow ridge use i-Gen and AnyRidge are stable and good at #45#46 (follow 2 years 6 months ) By  Dr . Liao ,Taiwan

  Presented By : Tsung Hsuan Liao

  Hit : 2171

• 

  Immediate implant placement after teeth..

  Immediate implant placement  after teeth extractions #34 #35. At the initial intraoral xray we saw a decay under the crown of tooth #35. After clinical examination the patient also had a infection on apical area of the #34 #35. The patient was sent for a CBCT and we can see the damage of the bone near to the alveolar nerve.  The treatment plan was to extract the two teeth and remove all the debris of the area. We used bone graft MEGA TCP plus A-PRF for bone regeneration. We placed the bone graft at the bottom of the socket in order to prevent contact of the implant with the alvoeral nerve. We take advantage the knife type threads and the design of the AR in order to take initial stability for the implants.

  Presented By : GEORGIOS KONSTANTINOS GKARDIAKOS

  Hit : 1393

• 

  Implants placement (AnyOne) + GBR.

  Implants placement (AnyOne) + GBR.

  Presented By : Nazar Hlushko

  Hit : 1307

• 

  Bone Regeneration and Implant Placement

  Patient came with panoramic x-ray that we could recognize bone defect at are #16 and decay on #17. The patient went for a CBCT and we saw a huge bone loss due to a apical cyst of tooth 16. Also the #17 could not be saved. We decided to extract #16 #17, remove all the debris of apical area and the granulation tissue. We make bone regeneration  and wait for 8 months.After 8 months we took another CBCT to check the bone situation, then we decided to proceed to the restoration with Any Ridge implants.

  Presented By : GEORGIOS K. GKARDIAKOS

  Hit : 1587

• 

  Placement of 2 AR Implants with sinus fl..

  Placement of 2 AR Implants with sinus floor elevation by means of piezo and GBR in one surgery with MP3 and Lamina-by Dr. Irfan Abas

  Presented By : Dr. Irfan Abas

  Hit : 2222

• 

  Case 1 Fuse abutments

  Full arch immediate load 

  Presented By : avik jonathan Dandapat

  Hit : 1549

• 

  AnyRidge Implant Maxillar All - on 4 Tec..

  AnyRidge Implant Maxillar All - on 4 Technique -by Dr. Miguel Stanleywe have had some extreme cases to resolve and 6 months ago this patient came in with two major problems. One was lack of bone, the other a tight budget. We carefully planned all options and decided to do the best we could to give her fixed teeth. We used a traditional approach with delayed loading and an all on four style surgery. A piezo surgical approach was used. We used the THOR for this. The i and a-PRF helped the GBR and tissue healing. Also a for 3 weeks LLLT (low level laser therapy was applied).We used tissue level abutments after healing, and a hybrid restoration. Megagen anyridge implants. Hopefully next year we do the bottom but save the teeth she has. Unfortunately we can't always get what we want.

  Presented By : Dr. Miguel Stanley

  Hit : 3956

• 

  Case of atrophic mandible by using AnyRi..

  Case of atrophic mandible. Surgery and rehabilitation by Dr. Raquel Zita Gomes.Anyridge implants by Megagen. Lab work by Vitor Matos. All-on-four with Implant Stability Quocient (ISQ) measures and hybrid metaloacrylic rehabilitation.

  Presented By : Dr. Raquel Zita Gomes

  Hit : 2441

• 

  Delayed implant placement of 2 AnyRidge ..

  Delayed implant placement of 2 AnyRidge implants in the mandible with guided bone regeneration-by Dr. Irfan Abas

  Presented By : Dr. Irfan - Abas

  Hit : 3047

• 

  AnyRidge Implants in Aesthetic Zone + i-..

  AnyRidge Implants in aesthetic Zone + i-Gen.-by Dr. Andres Paraud, Rancagua, Chile.

  Presented By : Dr. Andres Paraud Freixas

  Hit : 2637

• 

  Orthodontic treatment using AnyRidge Imp..

  Orthodontic treatment using AnyRidge Implants - by Dr. Hayashi Yoshiharu

  Presented By : Dr. Hayashi Yoshiharu

  Hit : 3717

• 

  Intedisciplinary management of a full mo..

  Intedisciplinary management of a full mouth rehabilitation: the smile design of the 50 plus generation using AnyRidge, MILA Kit and MegRhein Attachment systemA 67-year-old man presented for the prosthodontic rehabilitation of his partially edentulous jaws. His dental history included some extractions of  hopeless teeth and their replacement with fixed-teeth supported prosthesis. He expressed desire for the improvement of his chewing capacities and asked for changes in the appearance of his smile. Clinical and radiographic examination revealed a moderate to severe degree of alveolar ridge resorption, with major bone loss in the sites of tooth #33 and the right upper quadrant. Two implants were previously placed in position 43 and 33 to support a six units bridge, one of them failed.A treatment plan was prepared after a standard protocol that took into consideration the patient’s desires, treatment alternatives, and treatment costs. The plan included the surgical implant placement of 4 implants in each jaw and fabrication of a bimaxillary implant retained removable overdentures. We decided to maintain the implant #43 as an additional one to support the final mandibular overdenture, by the use of a Locator.Extraction of hopeless teeth and Socket PreservationThe first part of the treatment planning was the control of the chronic infections and extraction of all residual hopeless teeth with socket preservation technique to maintain the ridge volume. A temporary conventional complete denture was fabricated and used by the patient during a healing period of 4 months.Implant PlacementBecause of the adequate position of the temporary denture teeth, a decision was made to use a duplicate of the already fabricated dentures as a radiological and surgical template for the implant surgery planning and execution. The desired implant location was marked on the duplicate denture and stone cast. The duplicate denture was modified for the surgery by creating window-like openings in the areas of proposed implant sites. Vertical space analysis of the denture was performed for the selected attachment system (Locator Implants Attachment and MegRhein).Implant surgery included placement of the implants with the help of the surgical template. Implant surgery was carried out in a 1-stage surgical protocol. The implants were placed in the canine and first molar position for antero-posterior spread considerations. The implant site #16 presented a low height due to sinus pneumatization, a sinus lift was performed utilizing lateral window technique and MILA Kit (MegaGen, Kr). After completion, the complete dentures were relined with a soft-tissue conditioning material.  No complications were encountered during the surgical phase.  Five months later and after confirmation of the osseointegration, the patient presented for the definitive prostheses fabrication.Final Impression and Mounting to the ArticulatorThe maxillary and mandibular dentures were used as customized trays for final impressions. A closed tray impression technique was utilized. The Cuff height of the MegRhein abutments  were selected based on the existing soft tissue depth around the implants. One Locator Abutment was placed on implant #43. The final abutments were secured to the implants, and the impression copings were placed.The final impression was taken using a combination of high polyether  viscosity for borders registration and low viscosity polysulfide impression material placed inside the complete denture. Care was taken to center the denture during seating, and standard border molding procedures were used. After setting, the final impression was inspected and deemed acceptable. The duplicate denture was reinserted intraorally for the dentofacial evaluation, and the ideal location of the maxillary midline and incisal-occlusal plane was recorded. Standard photographs of the patients’ smile also were taken to be used in the laboratory for the denture tooth setup. The inter-maxillary bite registration was taken using a gothic arch tracer and the 3D position of the maxillary arch was registered using a facebow. The horizontal reference plane was the Camper Plane.The case was returned to the laboratory where standard protocols were used for the fabrication of the master cast. In the laboratory, implant analogs were attached to the impression copings, and a master cast was poured in type IV dental stone. The maxillary cast with the duplicate denture was positioned on the flat plane of the Kuwotech mounting plate. The occlusal registration tray was seated on the upper master cast, this one was secured to the index tray and mounted to the upper member of a semi-adjustable articulator (Op Finder, Kuwotech, Kr). The mandibular and maxillary master casts were articulated to each other with a centric relation record using the Gothic Arch Tracer, and the mandibular cast was mounted to the lower member of the articulator. Artificial denture teeth were selected based on the references provided by the existing dentures and the patient’s preference for a specific shade. The maxillary denture tooth setup was completed using the references provided by the Digital Smile Design Concept.The maxillary wax-trial denture was placed intraorally, and tooth position was evaluated using standard prosthodontic protocols. Proposed changes to the tooth position were recorded.Metal Framework FabricationThe selected attachments (Processing Capa) were placed on the top of the abutments. Undercut areas of the attachments were blocked out with wax. One layer of the baseplate wax was placed in the edentulous areas on the master cast. The refractory cast was fabricated by duplicating the master casts. The metal-reinforcing framework was waxed in a mesh-like form on the refractory cast, with leaving an adequate space for the resin material over the metallic caps. Several vertical retentive elements were waxed around the attachments on the framework. The framework was fabricated in the chrome-cobalt alloy using standard “lost wax” production techniques. The fit of the framework was verified, and its surface was finished and polished. The framework was positioned on the master cast.Prostheses Fabrication and DeliveryThe maxillary denture tooth setup was completed using the mounting plate, the the mandibular teeth mounted against the maxillary denture tooth setup. The wax-trial dentures were returned to the clinic for the try-in. The fit, occlusion, and esthetics of the prostheses were verified intraorally and approved by the patient.The prostheses were processed with a heat-polymeized acrylic resin using a standard compression molding protocol. The surfaces of the dentures were finished and polished. Processing clips were replaced with the light retention clips (Yellow for MegRhein and Blue for the Locator Attachment) respectively in the  the mandibular and maxillary overdenture.In the clinic, abutments were attached to the implants and torqued to the manufacturer’s recommended value. The metallic female housing are picked-up to the framework with an autopolymerized acrylic resin, directly in the patient’s mouth, this will allow to take into consideration the soft tissue depression during function and better force management of the occlusal forces around the implants. The prostheses were seated, and excessive pressure areas were adjusted with the help of pressure-indicatingpaste.The desired occlusal scheme was verified and adjusted intraorally. The patient received maintenance instructions, and the recall appointments schedule was established. At the subsequent recall appointment, the patient expressed satisfaction with the treatment.Conclusion Among different treatment options, an implant-retained overdenture is a simple, cost-effective solution in the rehabilitation of the edentulous jaws. The overdenture design includes a metal-reinforcing framework and uses prefabricated stock abutments and hinge-type resilient attachments for its retention. The advantage of such type of prosthesis is unequivocal on the advantages of the implant-anchored prosthesis (eg, improved quality of life for the patient and long-term preservation of the remaining alveolar and basal bone). This prosthetic option reestablish the principle functions of the masticatory system: swallowing, incision and phonation, in additionto the esthetic and smile rehabilitation.

  Presented By : Achraf - Souayah

  Hit : 8990

• 

  Sinus lift and filling with simultaneous..

  Sinus lift and filling using heterologous particulate bone and plasma Anyridge Implant placement on #15 and #16 simultaneous to the sinus bone graft, with ISQ measurents 

  Presented By : Raquel Zita Gomes

  Hit : 3834

• 

  Full mouth reconstruction in difficualt ..

  My patient had lost all occluion telations in vertical and horizental aspects.After designing,all upper teeth extracted atraumatically and fresh socket implants inserted .In thin ridge ,ridge split &expansion the implants were inserted and GBR with i gen was done .In lower jaw the Anyridge and mini implants were placed.After 4 months the implants were uncovered and healing abutments installed.The prosthetic phase started and final prosthetic were delivered. 

  Presented By : Amin - Dinparvar

  Hit : 3689

• 

  Aesthetic reconstruction by Anyridge imp..

  My patient lost her teeth as car accident.the alveolar ridge in this site had deficiency in both horizental and vertical aspect.I tried to augment the ridge with Timesh & zenograft.Unfortunately after 3 months ,Mesh exposure and tissue lost happen.so i decided to place the implants in the residual bone  and GBR .After 3 months later the healing abutments were installed to the implants and ISQ measurements done.For the final prosthesis design ,the suprastructure with single zirconia crowns helped me for reconstruction of the aesthetic part in both pink and white part.

  Presented By : Amin - Dinparvar

  Hit : 2683

• 

  Placement of Dental Implants in the Comp..

  Patient K., 42 y.o., admitted to the dental clinic of the “Reaviz” Medical University with complaints about difficulties in chewing the food due to the missing 2.6 tooth. Following the examination it was identified that a capsule-shaped septum 7 mm in height exists in the maxillary sinus positioned in the medio-distal direction throughout the total length of the sinus bottom. The thickness of the alveolar crest in the projection of the 2.6 tooth is 5 mm. The obtained data made it obvious that the standard sinus lift procedure would yield no positive results. Therefore a decision was made to perform the operation using the Samuel Lee’s patented  procedure and the crestal sinus lift MICA Kit by MegaGen.

  Presented By : Aleksander Lysov

  Hit : 2456

• 

  Placement of Dental Implants in the Comp..

  Patient K., 42 y.o., admitted to the dental clinic of the “Reaviz” Medical University with complaints about difficulties in chewing the food due to the missing 2.6 tooth. Following the examination it was identified that a capsule-shaped septum 7 mm in height exists in the maxillary sinus positioned in the medio-distal direction throughout the total length of the sinus bottom. The thickness of the alveolar crest in the projection of the 2.6 tooth is 5 mm. The obtained data made it obvious that the standard sinus lift procedure would yield no positive results. Therefore a decision was made to perform the operation using the Samuel Lee’s patented  procedure and the crestal sinus lift MICA Kit by MegaGen.

  Presented By : Aleksander Lysov

  Hit : 2351

• 

  Complex implant case by a patient with ..

  A patient which has a specialised produced protheses on korber konus construction because of cheilo-palatal-schisis had a problem because the supporting teeth were failing. This patients protheses was in us efor over 45 years. So it was important to save as much of there original protheses as possible. In this case we restore the retention of this protheses with kerators on anyridge implants in de the upper jaw. We chose the anyrdige implants because we where expecting type 3 bone quality and love to have some retention in the sponges bone. We had to change the biotype of the gum after fase one surgery and did this in de second stage. There is a picture from the transferring her old prothese in a new prothese and healing after onder year of function.

  Presented By : Dr. Ties T. Horneman

  Hit : 2365